English Français Deutsch Español Italiano Русский

Product Overview

 

PULSED LASERS. YLF Line...

YLF-Line pulsed DTL-series lasers provide laser pulse energy up to 300 at 1053 nm, up to 100 at 527 nm, up to 50 at 351 nm and up to 10 at 263 nm. YLF- Line lasers feature high stability of laser pulse energy in a wide range of pulse repetition rate (from single pulses to 10 kHz) and a pulse width < 10 ns.

 

PULSED LASERS. Garnet Line...

Garnet-line pulsed lasers are a cost-effective solution with stabilized pulse energy. Well-known Garnet line lasers are available at 266 nm, 355 nm, 532 nm or 1064 nm wavelengths. Industrial model for OEM GARNET (355 nm) features perfect compliance to OEM due to guaranteed custom laser parameters. Over 2000 of GARNET lasers have been sold during last 8 years to worlds leading industrial original equipment manufacturers (OEM). These lasers are working successfully in the customers mass-spectrometry, microdissection and other equipment.

 

CONTINUOUS WAVE LASERS. DTL-series...

CW DTL-series lasers radiate in green and infrared spectrum ranges. They yield up to 500 mW at 527 nm with noise level less than 1 % RMS and up to 2W at 1053 nm or 1064 nm with noise level less than 0.5 % RMS. The model DTL-318 with output up to 350 mW at 532 nm is available upon request.
The main features are: perfect beam quality, TEMoo, high stability of output power, PC control through RS-232.

CONTINUOUS WAVE LASERS. T-series...

T-series laser modules designed especially for OEM applications radiate up to 20 mW in green range at 532 nm or up to 100 mW in IR range at 1064 nm, feature stable output within wide temperature range and life time of >10,000 hrs verified with real-time tests. T-series module incorporates a driving electronics. Therefore, no additional driver for the laser diode is required. In order to operate, the module just needs a 3.3 VDC power supply. Each LCM-T-series laser module features an active power stabilization control loop. This control loop monitors output radiation of the laser module and maintains it at constant level within a wide temperature range. Spherical-mirror laser cavity provides perfect and stable beam geometry. Two-lens output optics yields well collimated centered and aligned beam. The above features allow considering T-series laser modules as the best price-performance choice for many practical applications.
Miniature T-series complete laser systems have output power of 3 mW in green (532 nm) or 50 mW in infrared (1064 nm); they comply with FDA 21 CFR 1040.10 and 1040.11 for complete laser products, being a good choice for use in laboratory and for educational purposes.
CW T-series laser modules/systems (532 nm, 1064 nm) comply to RoHS directive requirements.

 

CONTINUOUS WAVE LASERS. SLM CW green lasers...

Single longitudinal mode green lasers are presented with S-series modules and complete laser system DTL-317. The most important applications are: laser microscopy (LSCM, MPLSM), interference measurements, spectral analysis, flow cytometry, holography, laser-assisted measurements. Green SLM low noise S-series laser modules LCM-S-111 feature a single longitudinal mode, low noise, high coherence length and narrow linewidth, stable output power in wide operating temperature range due to MCU based driver with two-channel TE-controller. S-series laser modules are small-size OEM units intended for the custom equipment in various OEM projects. High repeatability of parameters from sample to sample allows prompt alignment during assembly and maintenance.
The model DTL-317 - green SLM low noise complete laser system complies with FDA 21 CFR 1040.10 and 1040.11 for complete laser products, features a single longitudinal mode, low noise, high coherence length and narrow linewidth, stable output power up to 50 mW in wide operating temperature range.