Model DTL-313 (527 nm)

Application fields:  test & measurement, crystal inspection, laser light show & displays, alignment, partial scattering & analysis.

Features:
Perfect beam quality, TEMoo
High stability of output power
Power adjustment, PC control via RS-232
OEM version and complete CDRH laser system are available
SM or MM fiber coupling option
1 mm beam diameter is available (optional)

Parameter / Model	DTL-313
Wavelength, nm	527
Output Power, mW	200 15%	350 10%	500 5%
Mode of operation	CW
Transverse mode	TEMoo
Beam    Divergence (full angle, ), mrad    Diameter at output, mm	0.6 1.5 0.1
Ellipcity	Better than 0.95
Polarization ratio	200:1, horizontal
Output power stability, 8 hours	1 %
Optical noise (RMS, 10 Hz 20 MHz)	1 %
Beam pointing stability	0.005 mrad at constant temperature; 0.009 mrad /
Operation temperature,	15 - 40
Warm-up time	5 min
PC control via RS-232	ON/OFF, output power control
Frequency of exchange via RS-232 interface	4800 b / per second
Dimensions, mm (L x W x H)    Laser Head    Power Supply (with the key)*	max. 301 x 90 x 55 190 x 91(115)* x 27
Weight, kg    Laser Head    Power Supply	1.8 0.6
Operating voltage    without AC/DC adapter, V    with AC/DC adapter, V	12 10% V DC 90 264 V AC
Maximum power consumption, W	60 (typ. 40)
Laser class (CDRH)	IIIb		IV
Compliance	RoHS, CDRH, CE
Drawing of laser head
Drawing of DC power supply
Drawing of fan heat sink for LH