...Laser-compact Group specializes in research, development and manufacturing of ultra-violet (UV), green and infrared (IR)
diode-pumped solid-state (DPSS) lasers....
ISO 9001:2008 certified

Model DTL-317 (532 nm, SLM)

Application fields: interference measurements, spectral analysis, flow cytometry, holography, laser microscopy (LSCM, MPLSM), laser-assisted measurements.

Features:
High coherence length
Single longitudinal mode & low noise
Stable output power in wide operating temperature range
Complete laser system

 

 

 

 

 

 

 

 

 

Parameter / Model DTL-317
Wavelength, nm 532
Output Power, mW 22 2 55 5
Mode Of Operation CW
Transverse mode TEMoo, M2 1.2 (typ. 1.05)
Longitudinal Modes Single Longitudinal Mode
Polarization linear, horizontal, 100:1
Line Width, nm 0.00001
Coherence Length, m 50
Beam
   Divergence (full angle, ), mrad
   Diameter At Output, mm

0.6 0.1
1.1 0.1
Ellipticity 0.95 - 1.05
Noise (10 Hz 20 MHz) 0.5% RMS (typ. 0.1%) and 2% p-to-p (typ. 0.5%)
Long Term Stability 2 %/8 hour
Warm-Up Time 10 min (typ. 5 min)
Operation temperature,

   of Laser Head

   of Power Supply


15 - 40

15 - 50

Operating voltage
   without AC/DC adapter, V
   with AC/DC adapter, V

10.8  13.2
90 264 (50 - 60 Hz)
Maximum power consumption, W 40
PC control via RS-232
Frequency of exchange via RS-232 interface 4800 b / per second
Weight, kg
   Laser Head
   Power Supply

   Heat Sink


0.9
0.6

1.0

Dimensions, mm
   Laser Head

   Laser Head with FHS

   Power Supply (with the key)*

   Power Supply with FHS (with the key)*


187 x 90 x 49

203 x 90 x 116
190 x 91 (115)* x 27

203 x 96 (121)* x 94

Cord length between LH and PSU, m 1
Laser Class IIIb
Life Time 5000 hours
Drawing of laser head Drawing
Drawing of AC power supply Drawing
Drawing of fan heat sink for LH Drawing