Model DTL-318 (532 nm)

Application fields:  test & measurement, crystal inspection, laser light show & displays, alignment, partial scattering & analysis.

Features:
Perfect beam quality, TEMoo
High stability of output power
Power adjustment, PC control via RS-232
OEM version and complete CDRH laser system are available

Parameter / Model	DTL-318
Wavelength, nm	532
Output Power, mW	200	350
Mode of operation	CW
Transverse mode	TEMoo
Beam    Quality, M2    Divergence (full angle, ), mrad    Diameter, mm	1.2 0.6 1.80.1
Ellipticity	no worse than 0.9
Polarization linearity	100:1, linear, horizontal
Output power stability, % / 8 hours	2
Optical noise (RMS, 10 Hz 20 MHz), %	2
Linewidth, nm	0.1
Operation temperature,	15 - 40
Warm-up time, min	5
PC control via RS-232	ON/OFF, output power control
Frequency of exchange via RS-232 interface	4800 b / per second
Dimensions, mm (L x W x H)    Laser Head    Power Supply (with the key)*	236 x 90 x 49 190 x 91(115)* x 27
Weight, kg    Laser Head    Power Supply	1.3 0.6
Operating voltage    without AC/DC adapter, V    with AC/DC adapter, V	12 10% V DC 90 264 V AC
Power consumption (max. at turning-on), W	80	100
Laser class (CDRH)	IIIb
Compliance	CDRH, CE
Drawing of laser head
Drawing of DC power supply
Drawing of fan heat sink for LH