Model DTL-323 (1053 nm)

Application fields:  high technologies R&D, test & measurement equipment, medical equipment, quality control, optical tweezers.

Features:
Perfect beam quality, TEMoo
High stability of output power
Power adjustment, PC control via RS-232
OEM version and complete CDRH laser system are available
SM or MM fiber coupling option
0.9 mm and 1.25 mm beam diameters are available (optional)

Parameter / Model	DTL-323
Wavelength, nm	1053
Output power (adjustable), mW	300 5%	1000 5%	2000 5%
Mode of operation	CW
Output power stability, % / 8 hours	2
Optical noise (RMS, 10 Hz - 20MHz), %	0.5
Output power adjustment (of nominal value, via RS-232)	10 - 100%	5 - 100%	3 - 100%
Beam    Quality, M2    Divergence (full angle, ), mrad    Diameter, mm	1.2 1 1.8 0.1
Transverse mode	TEMoo
Ellipcity	better than 0.95
Polarization ratio	100:1, vertical
Beam pointing stability	0.005 mrad at constant temperature; 0.009 mrad /
Beam static alignment tolerance, mm	0.5
Beam angular alignment tolerance, mrad	5.0
Operation temperature,	15 - 35
Warm-up time	5 min
PC control via RS-232	ON/OFF, output power control
Frequency of exchange via RS-232 interface	4800 b / per second
Expected lifetime, hours	10 000
Dimensions, mm  (L x W x H)    Laser Head    Power Supply (with the key)*	max. 301 x 90 x 55 190 х 91 (115)* х 27
Weight, kg    Laser Head    Power Supply	1.8 kg 0.6 kg
Operating voltage    without AC/DC adapter, V    with AC/DC adapter, V	12 10% V DC 90 264 V AC
Power consumption, typ/max, W	35/60
Laser class (CDRH)	IIIb	IV
Drawing of laser head
Drawing of DC power supply
Drawing of fan heat sink for LH