Model DTL-392QT (527 & 1053 nm) - 2-wavelength laser

Application fields:  various types of spectroscopy, laser microscopy, hi-tech R&D, light detection, non-contact inspection, photoacoustics, semiconductor processing.

Features:
IR and GREEN laser light from one source
Simultaneous pulses at 1053 and 527 nm in one beam with the same direction
Active Q-switched mode of operation with short pulse duration
Low jitter for critical timing applications
High beam quality, TEMoo
External / internal triggering, PC control via RS-232
OEM version and complete CDRH laser system are available

Parameter / Model	DTL-392QT
Wavelength, nm		527	1053
Pulse Energy @ 1 kHz,		150	150
Max. Average Output Power, mW		350 @ 5 kHz	800 @ upper 50 kHz
Pulse Repetition Rate, kHz    Ext. Triggering    Int. Triggering		Single shot to 50 kHz 0.01 - 30 kHz	Single shot to 100 kHz 0.01 - 30 kHz
Pulse Width, ns    @ 1 kHz    @ 5 kHz    @ 10 kHz    @ 30 kHz    @ 50 kHz    @ 100 kHz		9 14 17 50 80 -	10 17 25 70 120 170
Jitter (Laser Pulse to Sync Out), ns		1
Beam mode		TEMoo
Beam    Diameter (, at output aperture), mm    Divergence (full angle, ), mrad		0.7 3.0	1 4.0
Polarization		100:1, horizontal	100:1, vertical
Warm Up Time, min		10
Operating Temp/Humidity Range		15 - 35 / up to 80% non-condensing
Dimensions, mm    Laser Head    Laser Head with Heat Sink    Power Supply    Power Supply with Heat Sink		max. 301 x 90 x 55  max. 301 x 122 x 90 150 x 43 x 93 (x 115 with key) 150 x 110 x 93 (x 115 with key)
Operating Voltage    with AC/DC adapter    without AC/DC adapter		90 - 264 V AC 12 10% V DC
Drawing of laser head
Drawing of DC power supply
Drawing of fan heat sink for LH
Drawing of fan heat sink for PSU

 

Specifications are subject to change without notice.