Model DTL-399QT (351, 527 & 1053 nm) - 3-wavelength laser

Application fields:   various types of spectroscopy, LIDAR applications, laser microscopy, hi-tech R&D, light detection, non-contact inspection, photoacoustics, semiconductor processing.

Features:
IR, VIS and UV laser light from one source
Simultaneous pulses at 1053 nm, 527 nm and 351 nm in one beam with the same direction
Active Q-switched mode of operation with short pulse duration
Low jitter for critical timing applications
High beam quality, TEMoo
External / internal triggering, PC control via RS-232
OEM version and complete CDRH laser system are available

Parameter / Model	DTL-399QT
Wavelength, nm	351	527	1053
Pulse Energy @ 1 kHz,	50	50	100
Max. Average Output Power, mW	100 @ 3 kHz	100 @ 4 kHz	1000 @ upper 50 kHz
Pulse Repetition Rate, kHz    Ext. Triggering    Int. Triggering	Single shot to 30 kHz 0.01 - 30 kHz	Single shot to 50 kHz 0.01 - 30 kHz	Single shot to 100 kHz 0.01 - 30 kHz
Pulse Width, ns    @ 1 kHz    @ 5 kHz    @ 30 kHz    @ 50 kHz    @ 100 kHz	6 8 30	7 11 40 80	10 14 70 100 200
Peak power, kW (at single pulse - 1 kHz, Average Pulse Energy 50 µJ at 351 nm)	8	7	10
Jitter (Laser Pulse to Sync Out), ns	1
Beam mode	TEMoo
Beam    Diameter (, at output aperture), mm    Divergence (full angle, ), mrad	1.050.15 0.550.08	1.30.2 1.30.2	1.750.25 2.50.4
Polarization	100:1, vertical	50:1,horizontal	50:1,vertical
Warm Up Time, min	10
Laser Class	IV
Operating Temp/Humidity Range	15 - 35 / up to 80% non-condensing
Compliance	CDRH, CE
Dimensions, mm    Laser Head    Laser Head with Heat Sink    Power Supply    Power Supply with Heat Sink	max. 301 x 90 x 55  max. 301 x 122 x 90 150 x 43 x 93 (x 115 with key) 150 x 110 x 93 (x 115 with key)
Operating Voltage    with AC/DC adapter    without AC/DC adapter	90 - 264 V AC 12 10% V DC
Drawing of laser head
Drawing of DC power supply
Drawing of fan heat sink for LH
Drawing of fan heat sink for PSU

 

                                        

Typical DTL-399QT performance